If your Whirlpool Legacy Front-Load Washer is displaying the ‘oL’ error code, don’t worry – it’s typically a straightforward issue to resolve! This code indicates an “Overloaded Condition,” meaning your machine has detected a load of laundry that exceeds its capacity during the initial sensing phase. Essentially, it’s telling you there are too many items inside for a safe and effective wash.
What Triggers This Error?
- Excessive Garments: Simply loading too many clothes into the drum.
- Heavy Items: Washing large, bulky items like blankets, comforters, or several bath towels at once.
- Water Absorption: Some fabrics rapidly absorb water, increasing the overall sensed weight even if the dry load seemed manageable.
- Uneven Distribution: While less common for ‘oL’ specifically, a severely unbalanced load can sometimes contribute to sensing issues.
[JUSTANSWER_WIDGET]
How to Resolve the ‘oL’ Error
- Pause the Cycle: If the machine is running, it may pause itself and display the error. If not, try to pause or cancel the cycle.
- Open the Washer Door: Carefully open the washer door. If the door is locked, you might need to wait a few minutes for it to unlock after cancelling the cycle, or try unplugging the machine for 30 seconds and plugging it back in to reset the controls.
- Remove Excess Items: Take out a significant portion of the laundry. Aim to fill the drum no more than three-quarters full for most cycles, especially with dense items.
- Distribute the Load: Gently redistribute the remaining items evenly around the drum. Avoid creating a large clump of clothes on one side.
- Close and Restart: Securely close the washer door and attempt to restart your desired wash cycle. The ‘oL’ error should now be cleared.
- Consider Smaller Loads: For very bulky or heavy items, consider washing them individually or in very small batches to prevent recurrence of this error.
Need to replace the N/A (Load Reduction)? Check prices here: [REPAIR_LINK]