Seeing a ‘PF’ error code flash across your Whirlpool oven or range display can be a bit concerning, but don’t panic! This common code simply indicates a ‘Power Failure’ or ‘Power Outage.’ Essentially, your appliance lost power for a moment, which could be due to a brief flicker, a full blackout, or even a tripped circuit breaker. It’s usually an easy fix that won’t require a service call.
What Triggers This Error
- A momentary power flicker or brief power outage in your home.
- A full loss of electrical power to your residence.
- A tripped circuit breaker dedicated to the oven/range circuit.
- The oven being unplugged and then plugged back in, simulating a power loss.
[JUSTANSWER_WIDGET]
How to Resolve the PF Error
Fortunately, addressing the Whirlpool PF error is typically straightforward. Follow these steps to get your oven back to normal operation:
- Clear the Display: Press the CANCEL pad on your oven’s control panel. This action should immediately clear the ‘PF’ error from the display.
- Reset the Clock: After clearing the error, you will likely notice that the time of day clock needs to be reset. Follow the instructions in your oven’s user manual to set the correct time.
- Check Your Breaker: If your oven still appears to have no power or the error persists, proceed to your home’s main electrical panel. Locate the circuit breaker labeled for your kitchen or specifically for your oven/range. If it’s in the ‘tripped’ (middle) position, fully push it to the ‘OFF’ position, and then firmly flip it back to the ‘ON’ position.
- Test Oven Functionality: Once the error is cleared and the clock is reset (and breaker checked if necessary), try using your oven or range as you normally would to ensure it’s functioning correctly.
Need to replace the No Part Needed? Check prices here: [REPAIR_LINK]